Why it matters
A restricted vent wastes energy, wears the dryer out and is a leading cause of dryer fires. LG's guidance for d90 and d95 is clear: do not use the dryer until the vent is cleaned or repaired.
Clean the vent
- Lint filter — clean every load; wash it with soap and water monthly (fabric-softener film blocks airflow).
- Lint duct inside the dryer — vacuum the filter slot with a long nozzle.
- Duct behind the dryer — replace crushed foil duct with rigid or semi-rigid metal, as short and straight as possible.
- The full run — use a vent-cleaning brush kit from both ends. Rooftop vents in Las Vegas two-story homes often need a professional vent cleaner.
- Outside hood — the flap must open freely; remove bird nests and lint.
- Run the Flow Sense / installation check with a cold dryer to clear the code.
If the vent is clean
- No warm air at the duct: see LG dryer not heating.
- Dryer stops while clothes are still damp: clean the moisture sensor bars inside the drum with rubbing alcohol (fabric softener coats them).
- Heat but slow: the blower wheel may be clogged or damaged.
When to call
Slow drying with a clean vent, tE codes, or no heat. See LG dryer repair.
What LG's owner's manuals list for this problem
We compared the troubleshooting tables in 16 LG owner's manuals for these appliances. These are the causes LG lists most often, with LG's recommended first step. The last column shows in how many LG manuals the cause appears.
| Possible cause (per LG) | LG's recommended check | Manuals |
|---|---|---|
| Heat settings, load size, or dampness of clothing is not consistent | The drying time for a load will vary depending on the type of heat used (electric, natural gas, or LP gas), the size of the load, the type of fabrics, the wetness of the clothes, and the condition of the exhaust duct and | 11 |
| House fuse is blown, circuit breaker has tripped, or power outage has occurred | Reset circuit breaker or replace fuse. | 9 |
| ENERGY SAVER option selected (on some models) | If using the Cotton/Normal cycle, deselect the energy saver option. | 9 |
| Exhaust ducts are blocked, dirty, or duct run is too long | Confirm that the exhaust duct is properly configured and free of debris, lint, and obstructions. | 9 |
| Load is not properly sorted | Separate heavy items from lightweight items. | 9 |
| Large load of heavy fabrics | Heavy fabrics take longer to dry because they tend to retain more moisture. | 9 |
| Dryer controls are not set properly | Use the appropriate control settings for the type of load you are drying. | 9 |
| Lint filter needs to be cleaned | Remove the lint from the filter before every load. | 9 |
Source: troubleshooting sections of LG owner's manuals; wording shortened. Model-specific pages are in the LG model lookup.
Questions
What does d90 mean on my LG dryer?
The exhaust is about 90% restricted. Stop using the dryer until the vent is cleaned from the dryer to the outside.
How often should I clean my dryer vent in Las Vegas?
At least once a year, and more often for long rooftop runs, large families or homes with pets.