Models in this series
LG's manuals for this series cover these models. Your model number is on the rating label — where to find it.
- DLEX3070R
- DLEX3070W
- DLGX3071R
- DLGX3071W
- DLGX3471V
- DLGX3471W
LG DLEX3070R error codes
These 6 error codes appear in LG's documentation for this series. The page reference points to the LG manual where the code is listed. If your code is not here, check the full list of LG dryer codes.
| Code | What it means | What you can do | LG source |
|---|---|---|---|
| HS | Humidity sensor error — or Flow Sense test run while the dryer was still warm meaning varies by model | Run the installation check / Flow Sense test only when the dryer is cold. If HS returns cold, the sensor needs service. | LG owner's manual (DLEX3470*), p. 30 |
| nP | Supply voltage not correct or power was interrupted | Make sure the breaker is fully on (electric dryers use a double 240 V breaker) and the plug is seated. If the code returns, have an electrician check the outlet. | LG owner's manual (DLEX3470*), p. 30 |
| PF | Supply voltage not correct or power was interrupted | Make sure the breaker is fully on (electric dryers use a double 240 V breaker) and the plug is seated. If the code returns, have an electrician check the outlet. | LG owner's manual (DLEX3470*), p. 30 |
| PS | Supply voltage not correct or power was interrupted | Make sure the breaker is fully on (electric dryers use a double 240 V breaker) and the plug is seated. If the code returns, have an electrician check the outlet. | LG owner's manual (DLEX3470*), p. 30 |
| tE1 | Thermistor error — open or shorted sensor, or large difference between real and sensed temperature | Thermistor or harness; call for repair. | LG owner's manual (DLEX3470*), p. 30 |
| tE2 | Thermistor out of range (meaning differs on heat pump models) meaning varies by model | Very cold air from a long vent can trigger it on standard models; otherwise a sensor fault. | LG owner's manual (DLEX3470*), p. 30 |
When to call a technician
Codes that point to a sensor, motor, fan, board, heater or the sealed system need testing with meters and LG test mode. Typical LG dryer repairs in Las Vegas cost $200–$530 including the $75 service call — see repair prices and LG dryer repair.
Step-by-step guides for common problems:
Sources
- LG owner's manual for DLEX3470*, DLGX3471*, DLEX3070* and related models — 96 pages, LG P/No MFL62512860
- LG owner's manual for DLEX3470*, DLGX3471*, DLEX3070* and related models — 96 pages, LG P/No MFL62512860
Facts on this page are taken from LG's own documentation and LG's technician error-code reference; explanations are written by our technicians. LG manuals are copyrighted by LG Electronics and are not reproduced here. LG Appliances Repair Service is independent and not affiliated with LG.
LG DLEX3070R questions
What does tE1 mean on an LG DLEX3070R?
Thermistor error — open or shorted sensor, or large difference between real and sensed temperature. Thermistor or harness; call for repair.
What does tE2 mean on an LG DLEX3070R?
Thermistor out of range (meaning differs on heat pump models). Very cold air from a long vent can trigger it on standard models; otherwise a sensor fault.
Do you repair the LG DLEX3070R in Las Vegas and Henderson?
Yes. LG Appliances Repair Service repairs LG dryers, including the DLEX3070 series, in homes across Las Vegas and Henderson. The $75 service call is credited toward the repair.