Models in this series
LG's manuals for this series cover these models. Your model number is on the rating label — where to find it.
- DLEX7700KE
- DLGX7701KE
LG DLEX7700KE error codes
These 6 error codes appear in LG's documentation for this series. The page reference points to the LG manual where the code is listed. If your code is not here, check the full list of LG dryer codes.
| Code | What it means | What you can do | LG source |
|---|---|---|---|
| HS | Humidity sensor error — or Flow Sense test run while the dryer was still warm meaning varies by model | Run the installation check / Flow Sense test only when the dryer is cold. If HS returns cold, the sensor needs service. | LG service manual (DLEX7700KE), p. 22 |
| nP | Supply voltage not correct or power was interrupted | Make sure the breaker is fully on (electric dryers use a double 240 V breaker) and the plug is seated. If the code returns, have an electrician check the outlet. | LG service manual (DLEX7700KE), p. 22 |
| PF | Supply voltage not correct or power was interrupted | Make sure the breaker is fully on (electric dryers use a double 240 V breaker) and the plug is seated. If the code returns, have an electrician check the outlet. | LG service manual (DLEX7700KE), p. 22 |
| PS | Supply voltage not correct or power was interrupted | Make sure the breaker is fully on (electric dryers use a double 240 V breaker) and the plug is seated. If the code returns, have an electrician check the outlet. | LG service manual (DLEX7700KE), p. 22 |
| tE1 | Thermistor error — open or shorted sensor, or large difference between real and sensed temperature | Thermistor or harness; call for repair. | LG service manual (DLEX7700KE), p. 22 |
| tE2 | Thermistor out of range (meaning differs on heat pump models) meaning varies by model | Very cold air from a long vent can trigger it on standard models; otherwise a sensor fault. | LG service manual (DLEX7700KE), p. 22 |
Locks, resets and settings
From the LG owner's manual for this series. Button names are printed on the control panel; on some panels the function is printed under a button that has another main use.
- Child Lock / Control Lock. To turn the lock on or off: press and hold Reduce Static for 3 seconds. (LG owner's manual (DLEX7700*E), p. 39)
When to call a technician
Codes that point to a sensor, motor, fan, board, heater or the sealed system need testing with meters and LG test mode. Typical LG dryer repairs in Las Vegas cost $200–$530 including the $75 service call — see repair prices and LG dryer repair.
Step-by-step guides for common problems:
Sources
- LG service manual for DLEX7700KE — 75 pages, LG P/No MFL62119986
- LG service manual for DLGX7701KE — 75 pages, LG P/No MFL62119986
- LG owner's manual for DLEX7700*E, DLGX7701*E, DLEX7700KE (© 2015-2017) — 108 pages, LG P/No MFL67731038
Facts on this page are taken from LG's own documentation and LG's technician error-code reference; explanations are written by our technicians. LG manuals are copyrighted by LG Electronics and are not reproduced here. LG Appliances Repair Service is independent and not affiliated with LG.
LG DLEX7700KE questions
How do I turn off the control lock on an LG DLEX7700KE?
Press and hold reduce static for 3 seconds. (LG LG owner's manual (DLEX7700*E), p. 39.)
What does tE1 mean on an LG DLEX7700KE?
Thermistor error — open or shorted sensor, or large difference between real and sensed temperature. Thermistor or harness; call for repair.
What does tE2 mean on an LG DLEX7700KE?
Thermistor out of range (meaning differs on heat pump models). Very cold air from a long vent can trigger it on standard models; otherwise a sensor fault.
Do you repair the LG DLEX7700KE in Las Vegas and Henderson?
Yes. LG Appliances Repair Service repairs LG dryers, including the DLEX7700 series, in homes across Las Vegas and Henderson. The $75 service call is credited toward the repair.