Models in this series
LG's manuals for this series cover these models. Your model number is on the rating label — where to find it.
- WT1101CW
- WT1201CV
- WT1201CW
LG WT1101CW error codes
These 6 error codes appear in LG's documentation for this series. The page reference points to the LG manual where the code is listed. If your code is not here, check the full list of LG top load washer codes.
| Code | What it means | What you can do | LG source |
|---|---|---|---|
| dE | Door open error — the board does not see a closed door switch | Close the door firmly; remove clothing caught in the gasket; check for a warped or misaligned door. Repeated dE means the door lock assembly or wiring. | LG owner's manual (WT1201C*), p. 30 |
| dL | Top load: lid not locked | Close the lid firmly; check for items under the lid. If the lock is heard but dL remains, the lid lock assembly has failed. | LG service manual (WT1201C*), p. 41 |
| FE | Overfill — water level too high | Unplug immediately if water keeps coming in. Usually a water inlet valve stuck open; oversudsing can also trigger it. Call for repair. | LG owner's manual (WT1201C*), p. 30 |
| LE | Locked motor — the motor cannot turn | Check that the drum turns freely by hand (power off). On LG direct-drive washers the usual fault is the rotor position (hall) sensor, then the stator or wiring; a foreign object between tubs is possible. Call for repair. | LG owner's manual (WT1201C*), p. 31 |
| PE | Pressure (water level) sensor error | Sensor, its hose (a pin-hole leak) or harness. Running Tub Clean can help if suds caused it; otherwise call. | LG owner's manual (WT1201C*), p. 31 |
| tE | Thermistor (water temperature sensor) error | Sensor or harness out of range. Call for repair. | LG owner's manual (WT1201C*), p. 31 |
When to call a technician
Codes that point to a sensor, motor, fan, board, heater or the sealed system need testing with meters and LG test mode. Typical LG top load washer repairs in Las Vegas cost $200–$910 including the $75 service call — see repair prices and LG top load washer repair.
Step-by-step guides for common problems:
- LG Washer Not Draining (OE)
- LG Washer Not Spinning (UE / LE)
- LG Washer Door / Lid Won't Lock (dE, dL)
- LG Washer Leaking Water
- LG Washer Loud Noise or Shaking
- LG Top Load Washer Not Agitating
Sources
- LG service manual for WT1201C*, WT1101C*, WT1201CW and related models — 55 pages
- LG owner's manual for WT1201C*, WT1101C*, WT1101CW — 84 pages
- LG owner's manual for WT1201C*, WT1101C*, WT1201CV — 76 pages
- LG owner's manual for WT1201CV, WT1201CW, WT1101CW — 76 pages
Facts on this page are taken from LG's own documentation and LG's technician error-code reference; explanations are written by our technicians. LG manuals are copyrighted by LG Electronics and are not reproduced here. LG Appliances Repair Service is independent and not affiliated with LG.
LG WT1101CW questions
What does dL mean on an LG WT1101CW?
Top load: lid not locked. Close the lid firmly; check for items under the lid. If the lock is heard but dL remains, the lid lock assembly has failed.
What does LE mean on an LG WT1101CW?
Locked motor — the motor cannot turn. Check that the drum turns freely by hand (power off). On LG direct-drive washers the usual fault is the rotor position (hall) sensor, then the stator or wiring; a foreign object between tubs is possible. Call for repair.
Do you repair the LG WT1101CW in Las Vegas and Henderson?
Yes. LG Appliances Repair Service repairs LG top load washers, including the WT1101 series, in homes across Las Vegas and Henderson. The $75 service call is credited toward the repair.